TuffStuff CDM-400 Flat/Incline Bench



The TuffStuff CDM-400 flat/incline bench is a commercial eight position multi angle bench that adjusts from flat through shoulder press positions.

Contoured lumbar design provides additional lower back support.

Independent seat adjustment.

Maximum weight: 800 lb/363 kg


-2 x 3” 11-gauge oval tubular steel frames with a combination of 2 x 2” round tubing.
-All welded construction conforming to Structural Welding Code-Steel Standards and Specifications.
-Powder coat finish – Platinum Sparkle main frame and Cathedral Gray weight stack protective shields.
-3/16” and 1/8” USA-Made/Certified EXERFLEX PRO® high performance fitness cable.
-3/4” solid steel 1045 (tgp) hard chrome finish.guide rods.
-1/2” push-pull spring loaded solid steel adjustment pins with ultimate load of 9040 lbs. and 46042 psi sheer strength.
-All primary and secondary pivot assemblies are non-friction 2″ sealed bearings and 1″ solid steel pivot axles.
-TuffStuff’s proprietary “flat-groove” 4-1/2” and 3-1/2” fiberglass-impregnated nylon pulleys with sealed roller bearings.
-All frame bolts and nuts are 3/8” and 1/2” zinc oxide. Meets ANSI specifications.


10 YEARS: Structural main frames, welds, cams and weight plates.

5 YEARS: Pivot bearings, pulleys, bushings, guide rods and gas shocks.

1 YEAR: Cables, linear bearings and pull-pin components.

6 MONTHS: Upholstery, finish and rubber grips.

ALL OTHER PARTS not mentioned, one year from the date of purchase to the original purchaser.

Light Commercial Use: Light Commercial warranty applies only to facilities like hotels, apartment complexes, personal training studios, fire & police stations, etc. where the equipment would be used by no more than 30 people per day.

Lifetime on everything to the original purchaser when used only in a HOME environment, applies to defects from manufacturer only.
* See Owner’s Manual for details.

Maximum weight: 800 lb/363 kg

Length x Width x Height: 57 x 27 x 41 in/145 x 69 x 104 cm
Weight: 82 lb/37 kg